Application of oil-gas separator in compressor!!
1, gas-oil separation filter complete with air compressor
Under normal circumstances, supporting oil and gas separation filter air compressor must select is greater than or equal to the air compressor outlet flow, prevents the use of the process in the inhaled air filter air compressor small dust separator of oil and gas that cannot be blocked on the thin separation layer, thus reducing the flow of oil and gas separation filter, resulting in early oil and gas separation filter pressure difference is too big. In supporting oil and gas separation filter outlet flow of compressed air is the most suitable 105% more to choose from.
2, the service life of oil-gas separator
Aging oil deposits, air pollutants and wear particles will affect the life of oil-gas separator. Users, request the final pressure is not the same. In actual use, the ultimate pressure of compressor oil separator for 0.8-1bar and vacuum pump 0.5bar. Accumulated dirt from the oil and gas separation filter in high oil flow will increase. This can be measured by the sewage flow. Emissions directly and the separation structure design of compressor. Best value for emissions generally about 1g per cubic metre of oil. So oil and gas separation filter service life cannot be measured by time, only in the ultimate pressure of oil and gas separation filter to determine life expectancy.
3, to ensure that oil and gas separation filter service life
Proper maintenance is to ensure that oil and gas separation of lubricating oil filter element has a prerequisite for satisfactory service life. In General, the separation of oil and gas separation filter life only by the thin layer of deposits of solid particles (oil oxides of wear particles) limit, resulting in increased pressure. Dirt in the oil can be replaced by any air compressor air filter oil filter and observe the oil replacement cycle to reduce. In this way, can enter into the dirt from the oil and gas separation filter keep at least to extend maintenance any maintenance cycle.
4, compressed air consumption
Working conditions that influence air compressor oil tank oil level and critical conditions, such as volatile oil, and separation and return system results will result in a short time or a long time of consumption increases. For example, the oil return pipe blockage can cause isolated accumulation at the end of oil-gas separator. Product oil related to the magnitude and the accumulation of oil volume.
5, the design of oil storage tanks
Tanks store played a role in the air compressor compressor oil; buffer of compressed air flow rates; oil and gas separation filter front-stage separation of liquid oil. Tank is a determinant of oil content in oil-gas separator, oil tank design is to reduce the oil content of the compressed air, if the design will result in increased oil content of the compressed air, and increase energy consumption. Air compressor equipment how to reduce energy loss, oil tank design of what would be considered reasonable.